Program 26 to 35
Xen Topaz Programming Manual 246
PROGRAM 31: EXTERNAL SPEAKER AND INTERNAL PAGING
31-05: U
NIVERSAL NIGHT ANSWER OVER EXTERNAL SPEAKER
Description
Use Program 31-05 : Universal Night Answer over External Speaker to assign Universal Night Answer
ringing to each External Paging zone. For each trunk port (1-51), you make a separate entry for each Exter-
nal Paging zone (1-6). When programming, the zones on the PGDU are numbers 1-6.
For Incoming Ring Tone Audible on External Speaker, you make a separate entry for each Night Service
mode.
Input Data
Conditions
Speakers 1 ~ 6 apply to 2 PGDU card.
Speaker 7 is the in-built part on 308M.
Feature Cross Reference
♦ Paging, External
♦ Night Service
Telephone Programming Instructions
To enter data for Program 31-05 (Universal Night Answer):
1. Enter the programming mode.
2. Enter 31 05
3. Enter the number of the item you want to program.
4. Select the Trunk number to be Programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB COPY
Trunk Port No. External Speaker No.
Day/Night Mode Input Data
Default
1-51 1-7
1-8
0 : No Ringing
1 : Ringing
0
31-05-01 Trunk1
Spkr1 Mode1 = 0
31-05-xx
xxxxx
To Next Page
Loading...
