Xen Topaz Programming Manual 45
Program 10 to 11
PROGRAM 11: SYSTEM NUMBERING
11-12: S
ERVICE CODE SETUP (FOR SERVICE ACCESS)
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes which
are used for service access. You can customize additional Service Codes in Programs 11-10, 11-11, 11-15
and 11-16.
The following chart shows:
• The number of each code (01-)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code’s default entry. For example, dialling 805 (code 05) will cancel a previously set Camp-On.
• Programs that may be affected with the changing the code.
Input Data
IN
SA
SB
Prog. No. Item Terminals Default
Related
Program
11-12-01
Call Forwarding / Do Not Disturb Override
Activating Call Forwarding/Do Not Disturb Override.
This code is only available if you disable the voice
mail Single Digit dialling code in Program 11-16-09.
KTS,SLT 807
11-16-09
11-12-02
Conference
KTS,SLT
826
11-12-03
Override (Off-Hook Signalling)
KTS,SLT
809
11-12-04
Camp on/Call Waiting Callback
KTS,SLT
850
11-12-05
Cancel Camp on
KTS,SLT
870
11-12-06
Switching of Voice Call and Signal Call
KTS,SLT
812
11-12-07
Step Call
KTS,SLT
808
11-12-08
Barge-In
KTS,SLT
810
11-12-09
Change to STG All Ring
KTS,SLT
780
16-02
11-12-10
Common Personal Abbreviated Dialling
KTS,SLT
*
11-12-11
Group Abbreviated Dialling
KTS,SLT
814
11-12-12
Last Number Dial
KTS,SLT
#
11-12-13
Saved Number Dial
KTS,SLT
815
11-12-14
Trunk Group Access
KTS,SLT
804
11-12-15
Specified Trunk Access
KTS,SLT
805
11-12-16
Trunk Access Via Networking
KTS
866
11-12-17
Clear Last Number Dialling Data
KTS,SLT
876
11-12-18
Clear Saved Number Dialling Data
KTS,SLT
885
11-12-19
Internal Group Paging
KTS,SLT
801
31-01-01
11-12-20
External Group Paging
KTS,SLT
803
11-12-21
Meet Me Answer to Specified Internal Paging Group
KTS,SLT
864
11-12-22
Meet Me Answer to External Paging
KTS,SLT
865
11-12-23
Meet Me Answer in Same Paging Group
KTS,SLT
863
11-12-24
Paging Combined
KTS,SLT
751
31-07