NEC Xen Topaz - Fixed Call Forwarding

Program 21 to 25
Xen Topaz Programming Manual 202
PROGRAM 24: HOLD/TRANSFER SETUP
24-06: F
IXED CALL FORWARDING
Description
For each extension/virtual extension port, use Program 24-06 : Fixed Call Forwarding to assign the Fixed
Call Forwarding Type (0-4) and the destination extension/virtual extension. The following chart shows the
Fixed Call Forwarding types:
The Fixed Call Forwarding destination can be an on- or off-premise extension or a Voice Mail extension.
Input Data
Conditions
Do not use Fixed Call Forwarding Type 1 (Both Ringing) with Voice Mail ports.
Feature Cross Reference
♦ Call Forwarding, Fixed
IN
SA
SB
Fixed Call Forwarding Type Description
0
Fixed Call Forwarding Disable
1
Fixed Call Forwarding with both extension ring-
ing
2
Fixed Call Forwarding when unanswered
3
Fixed Call Forwarding immediate
4
Fixed Call Forwarding when busy or unan-
swered
Extension Number
Max. 4 digits
Fixed Call Forwarding Type
Transferred
Telephone
Number
Default Description
0 : Call Forwarding Disable
1 : Call Forwarding with both extension
ringing
2 : Call Forwarding when unanswered
3 : Fixed Call Forwarding immediate
4 : Call Forwarding when busy or unan-
swered
Max. 4 digits 0
Set the type of Fixed Call
Forward type and specify
the extension number
transferred on originated
telephone.