Program 40 to 92
Xen Topaz Programming Manual 310
PROGRAM 90: MAINTENANCE PROGRAM
90-03: S
AVE DATA
Description
Use Program 90-03 : Save Data to save the programmed data on the SRAM and Flash ROM to the Re-
movable Compact Flash Memory. This program should be used after changing the programmed data.
Input Data
[Data Save] : Dial 1 and HOLD key (Press only HOLD key for cancel)
Conditions
System data is saved into the directory named “data” on the CompactFlash card inserted into the EXIFU-A1
card. Previously saved data in the “data” directory will be overwritten. To retain previously saved data, re-
name the directory or copy from the CompactFlash onto other media.
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-03 (Save Data):
1. Enter the programming mode.
2. Enter 90 03
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
90-03-01
Data Save
90-03-xx
xxxxx
To Next Page
Loading...
