NEC Xen Topaz - Page 316

Program 40 to 92
Xen Topaz Programming Manual 309
PROGRAM 90: MAINTENANCE PROGRAM
90-02: S
ETTING THE PROGRAMMING PASSWORD
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-02 (Setting the Programming Password):
1. Enter the programming mode.
2. Enter 90 02
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Select the User number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
90-02-01 User1
Name -NEC-I
90-02-xx
xxxxx