NEC Xen Topaz - Service Code Setup (for System Administrator

Xen Topaz Programming Manual 40
Program 10 to 11
PROGRAM 11: SYSTEM NUMBERING
11-10: S
ERVICE CODE SETUP (FOR SYSTEM ADMINISTRATOR)
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service Codes
for the System Administrator. You can customize additional Service Codes in Programs 11-11, 11-12, 11-15,
and 11-16. The following chart shows:
• The number of each code (01-)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code’s default entry. For example, dialling 724 (item 26) allows users to force a trunk line to discon-
nect.
• Programs that may be affected with the changing the code.
Input Data
IN
SA
SB
Prog.
No.
Item Terminals Default
Related
Program
11-10-01
Day / Night Mode Switching
KTS,SLT 818
12-xx
20-07-01
11-10-02
Changing the Music on Hold Tone
KTS
881
10-04
11-10-03
Setting the System Time
KTS
828
11-10-04
Storing Common Abbreviated Dialling Numbers
KTS
853
11-10-05
Storing Group Abbreviated Dialling Numbers
KTS
854
11-10-06
Setting the Automatic Transfer for Each Trunk Line
KTS
833
11-10-07
Cancelling the Automatic Transfer for Each Trunk
Line
KTS
834
11-10-08
Setting the Destination for Automatic Trunk Transfer
KTS
835
11-10-09
Charging Cost Display
KTS
771
11-10-10
-Not Used-
-
-
11-10-11
Entry of Credit for Toll Restriction
KTS
774
11-10-12
Night Mode Switching (Other Groups)
KTS
718
12-xx
11-10-13
-Not Used-
-
-
11-10-14
-Not Used-
-
-
11-10-15
-Not Used-
-
-
11-10-16
Leaving Message Waiting
KTS
726
11-11-09
11-10-17
Dial Block by Supervisor
KTS
701
90-19
11-10-18
Off-Premise Call Forward by Doorphone
KTS
822
13-05
11-10-19
-Not Used-
-
-
11-10-20
VRS - Record/Erase Message
KTS,SLT
716
20-07-13
11-10-21
VRS - General Message Playback
KTS,SLT
711
20-07-14
11-10-22
VRS - Record or Erase General Message
KTS,SLT
712
20-07-15
11-10-23
SMDR – Extension Accumulated Printout Code
KTS
721
20-07-18
11-10-24
SMDR - Group Accumulated Printout Code
KTS
722
20-07-19
11-10-25
Account Code Accumulated Printout Code
KTS
723
20-07-20
11-10-26
Forced Trunk Disconnect (For Analogue Trunk only)
KTS,SLT
724
20-07-11
11-10-27
Trunk Port Disable
KTS
745
20-07-12
11-10-28
-Not Used-
-
-
11-10-29
-Not Used-
-
-