Program 40 to 92
Xen Topaz Programming Manual 271
PROGRAM 40: VOICE MAIL SETUP
40-09: V
OICE MAIL MULTIPLE ADDRESS GROUP SETUP
Description
Use Program 40-09 : Voice Mail Multiple Address Group Setup to define the broadcast group of a Voice
Mail (DSPDB) mailbox.
Input Data
Conditions
None
Feature Cross Reference
♦ Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-09 (Voice Mail Multiple Address Group Setup):
1. Enter the programming mode.
2. Enter 40 09
3. Enter the number of the item you want to program.
4. Select the Multiple Address Group number to be programmed by pressing the FLASH or the VOLUME▲
or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Multiple Address
Group Number
Destination Box Number Box Number Default
Related
Program
1-10 1-100 Dial (Up to 4 digits) No setting
40-02
40-09-01Mlt GP1
Dest001 BoxNo
40-09-xx Mlt GPxx
xxxxx
To Next Page
Loading...
