NEC Xen Topaz - Page 277

Program 40 to 92
Xen Topaz Programming Manual 270
PROGRAM 40: VOICE MAIL SETUP
40-06: V
OICE MAIL AUTOMATED ATTENDANT SETUP
Description
Use Program 40-06 : Voice Mail Automated Attendant Data Setup to define the outside lines to use the
automated attendant recording operation of the Voice Mail (DSPDB).
Input Data
Conditions
None
Feature Cross Reference
♦ Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-06 (Voice Mail Automated Attendant Data Setup):
1. Enter the programming mode.
2. Enter 40 06
3. Enter the number of the item you want to program.
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Trunk Port Number
1-51
Day/Night Mode
1-8
Prog. No. Item Input Data Default
Related
Program
40-06-01 Operation Mode
0 : Automated Attendant
1 : Not Used
0
40-06-02 Guidance Message Number 0-48 0
40-06-03
Message Box Number for Leaving a
Message
0-300 0
40-06-01 Trunk1
Mode1 OPE-Mode 0
40-06-xx Trunkxx
xxxxx