NEC Xen Topaz - Page 276

Program 40 to 92
Xen Topaz Programming Manual 269
PROGRAM 40: VOICE MAIL SETUP
40-05: M
ESSAGE NOTIFICATION SETUP
Description
Use Program 40-05 : Call Information Setup to define the message notification facility of the Voice Mail
(DSPDBU).
Input Data
Conditions
None
Feature Cross Reference
♦ Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-05 (Call Information Setup):
1. Enter the programming mode.
2. Enter 40 05
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB COPY
Prog. No. Item Input Data Default
Related
Program
40-05-01 Maximum number of outgoing call
simultaneously
0-8 1
40-05-02 Trunk Route Number 0-25 1
40-05-03
ISDN Calling Party Number
0-9,*,#
(Max.16 digits)
No setting
40-05-04 Call interval for intercom call 1-30 minutes 10
40-05-05 Call interval for external call 1-30 minutes 10
40-05-06 Maximum number of intercom call 1-100 3
40-05-07 Maximum number of external call 1-100 3
40-05-01
SimultaneousMax1
40-05-xx
xxxxx