NEC Xen Topaz - Data Format for SMDR and System Reports

Program 40 to 92
Xen Topaz Programming Manual 302
PROGRAM 80: BASIC HARDWARE SETUP FOR SYSTEM
80-05: D
ATA FORMAT FOR SMDR AND SYSTEM REPORTS
Description
Use Program 80-05 : Date Format for SMDR and System Reports to define the date format when print-
ing out the SMDR, alarm report, system information report, etc.
Input Data
Conditions
None
Feature Cross Reference
♦ Station Message Detail Recording
♦ Time and Date
Telephone Programming Instructions
To enter data for Program 80-05(Data Format for SMDR and System Reports):
1. Enter the programming mode.
2. Enter 80 05
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Date Format
Default
0 : American Format (Month/Day/Year)
1 : Japanese Format (Year/Month/Day)
2 : European Format (Day/Month/Year)
2
80-05-01
Data Format 2
80-05-xx
xxxxx