NEC Xen Topaz - Firmware Information

Program 40 to 92
Xen Topaz Programming Manual 325
PROGRAM 90: MAINTENANCE PROGRAM
90-17: F
IRMWARE INFORMATION
Description
Use Program 90-17 : Firmware Information to display the firmware information on the 308M and other
PCBs.
Input Data
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-17 (Firmware Information):
1. Enter the programming mode.
2. Enter 90 17
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Data Component
90-17-01
DSP Firmware Version Number 00.00.00.00 – 15.15.15.15 BCD Code (2 Byte)
90-17-02
DSPDB Firmware Version Number 00.00.00.00 – 15.15.15.15 BCD Code (2 Byte)
90-17-03
-Not Used- - -
90-17-04
-Not Used- - -
90-17-05
-Not Used- - -
90-17-06
BRIU Firmware Version Number 00.00 – 15.15 BCD Code (1 Byte)
90-17-10
- Not Used - - -
90-17-11
- Not Used - - -
90-17-12
-Not Used- - -
90-17-13
-Not Used- - -
90-17-01
DSP . . .
90-17-xx
xxxxx