NEC Xen Topaz - Page 235

Program 26 to 35
Xen Topaz Programming Manual 228
PROGRAM 26: ARS SERVICE & LEAST COST ROUTING
26-06: LCR A
UTHORIZED CODE TABLE
Description
Use Program 26-06 : LCR Authorization Code Table to define the optional Authorization code (or PIN
code) required by the Indirect Carrier. The Authorization code is inserted if set in Program 26-05-03.
Input Data
Conditions
The settings must comply with the requirements of the Indirect Carrier.
The Authorization Code is used by the Indirect Carrier to identify the customer for billing purposes.
Feature Cross Reference
♦ Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-06 (LCR Authorization Code Table):
1. Enter the programming mode.
2. Enter 26 06
3. Enter the number of the item you want to program.
4. Select the Authorization Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Authorization
Table Number
Description Input Data Default
Related
Program
1-10 Authorization Code
Max. 10 digits（0-9,*,#）
No set-
ting
26-05-03
26-06-01AthCod1
Dial
26-06-xxAthCodxx
Dialxxxxxxxxxxxxx