NEC Xen Topaz - Page 284

Program 40 to 92
Xen Topaz Programming Manual 277
PROGRAM 44: ARS/F-ROUTE SETUP
44-03: D
IAL ANALYSE EXTENSION TABLE
Description
Use Program 44-03 : Dial Analyze Extension Table to set the dial extension analyze table.
Input Data
1. Dial Analysis Table Number 1-250:
2. Dial Analysis Table Number 251:
3. Dial Analysis Table Number 252:
Conditions
None
Feature Cross Reference
♦ Automatic Route Selection (ARS)/F-Route
IN
SA
SB
Extension Table Area Number
1-4
Dial Analysis Table Number
1-252
Prog. No. Item Input Data Default
Related
Program
44-03-01
Dial Up to 36 digits
No setting
44-03-02
ARS/F-Route Se-
lect Table Number
[Program 44-01 : 0]
0-500 (ARS/F-Route Table Number)
<Program 44-05>
[Program 44-01 : 1]
0-500 (ARS/F-Route select table Number)
<Program 44-04>
0
Prog. No. Item Input Data Default
Related
Program
44-03-03
ARS/F-Route
Select Table
Number
[Program 44-01 : 0]
0-500 (ARS/F-Route Table Number)
<Program 44-05>
[Program 44-01 : 1]
0-500 (ARS/F-Route select table Number)
<Program 44-04>
0
Prog. No. Item Input Data Default
Related
Program
44-03-04
Next Table Area
Number
0-4
0