NEC Xen Topaz - Page 283

Program 40 to 92
Xen Topaz Programming Manual 276
PROGRAM 44: ARS/F-ROUTE SETUP
44-02: D
IAL ANALYSIS TABLE FOR ARS/F-ROUTE
Conditions
None
Feature Cross Reference
Automatic Route Selection (ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-02 (Dial Analysis Table for ARS/F-Route Access):
1. Enter the programming mode.
2. Enter 44 02
3. Enter the number of the item you want to program.
4. Select the Analyze table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
44-02-01A-TBL1
Dial
44-02-xx A-TBLxxx
xxxxx