Program 40 to 92
Xen Topaz Programming Manual 280
PROGRAM 44: ARS/F-ROUTE SETUP
44-05: ARS/F-R
OUTE TABLE
Telephone Programming Instructions
To enter data for Program 44-05 (ARS/F-Route Table):
1. Enter the programming mode.
2. Enter 44 05
3. Enter the number of the item you want to program.
4. Select the ARS/F-Route Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
44-05-01FRout1
1:TRK Grp = 0
44-05-xxFRoutxxx
xxxxx
To Next Page
Loading...
