NEC Xen Topaz - Page 50

Xen Topaz Programming Manual 43
Program 10 to 11
PROGRAM 11: SYSTEM NUMBERING
11-11: S
ERVICE CODE SETUP (FOR SETUP/ENTRY)
Input Data (cont.)
Conditions
None.
Feature Cross Reference
Conference
IN
SA
SB
11-11-25
Automatic Transfer Setup for Each Extension Group
KTS,SLT 702
20-11-17
24-05
11-11-26
Automatic Transfer Cancellation for Each Extension
Group
KTS,SLT 703
11-11-27
Destination of Automatic Transfer Each Extension
Group
KTS 704
20-11-17
24-05
Prog. No
Item Terminals Default
Related
Program
11-11-28
Delayed Transfer for Every Extension Group
KTS,SLT
705
20-11-17
24-05
24-02-08
11-11-29
Delayed Transfer Cancellation for Each Extension
Group
KTS,SLT
706 20-11-17
11-11-30
DND Setup for Each Extension Group
KTS,SLT
707
11-11-31
DND Cancellation for Each Extension Group
KTS,SLT
708
11-11-32
-Not Used-
- -
11-11-33
Dial Block
KTS,SLT
700
11-11-34
Temporary Toll Restriction Override
KTS,SLT
875 21-07
11-11-35
Pilot Group Withdrawing
KTS,SLT
750
11-11-36
Toll Restriction Override
KTS,SLT
763 21-14
11-11-37
Adjusting Ring Volume
KTS
829
11-11-38
Programmable Function Key Programming (Dialling
852 Service Code: Appearance Level))
KTS
852
15-07
11-11-17
11-11-39
-Not Used-
- -
11-11-40
VRS/ Off-Premise Call Forwarding/Selectable Display
Message
KTS,SLT
713
11-11-41
Tandem Ringing
KTS,SLT
744
11-11-42
Transfer Dial Setting for Out of Range
KTS
789 13-06
11-11-43
Headset Ringing Mode Switching
KTS,SLT
788