Program 12 to 15
Xen Topaz Programming Manual 101
PROGRAM 15: EXTENSION BASIC SETUP
15-08: I
NCOMING VIRTUAL EXTENSION RING TONE SETUP
Telephone Programming Instructions
To enter data for Program 15-08(Incoming Virtual Extension Ring Tone Setup):
1. Enter the programming mode.
2. Enter 15 08
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB COPY
15-08-01 TEL200
ICM Tone Pttrn 0
15-08-xx TELxxxx
xxxxx
To Next Page
Loading...
