Program 16 to 20
Xen Topaz Programming Manual 130
PROGRAM 20: SYSTEM OPTION SETUP
20-11: C
LASS OF SERVICE OPTIONS (HOLD/TRANSFER SERVICE)
Input Data (Cont)
*All Classes are above mentioned default value.
Conditions
None
Feature Cross Reference
♦ Class of Service
IN
SA
SB
20-11-13
Operator Transfer After Hold Callback
Enables/disables an extension’s ability to have a call
which recalls from hold transfer to the operator.
0
20-11-14
Trunk to Trunk Transfer Restriction
Disable (0) or enable (1) the Trunk-to-Trunk Transfer
Restriction option. If enabled, trunk-to-trunk transfer
is not possible.
0
Prog. No. Item Input Data Default*
Related
Program
20-11-15
VRS Personal Greeting
Enables/disables extension’s ability to dial Service
Code
713 to record, listen to or erase the Personal Greet-
ing
Message.
0 : Off
1 : On
1
20-11-16
Call Redirect
Enable or disable a keyset user’s ability to transfer a
call
to a pre-defined destination (such as an operator,
voice
mail, or another extension) without answering the
call.
0
20-11-17
Call transfer setup for each telephone group
1
20-11-18
No Recall
Allow (0) or prevent (1) answered Transferred calls
from
recalling the originating extension.
0
20-11-19
Normal/Extended Park
Determine if an extension’s Class of Service should
allow
either a normal or extended Park.
0
20-11-20 Ring Inward recall disable
0
20-11-21 On Hook Trunk to Trunk Transfer Restriction
0
To Next Page
Loading...
