NEC Xen Topaz - Page 160

Program 21 to 25
Xen Topaz Programming Manual 153
PROGRAM 21: OUTGOING CALL SETUP
21-02: T
RUNK ROUTING FOR EXTENSIONS
Description
Use Program 21-02 : Trunk Group Routing for Extensions to assign Program 14-06 routes to exten-
sions.
Input Data
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 21-02(Trunk Group Routing for Extensions):
1. Enter the programming mode.
2. Enter 21 02
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Number Max. 4 digits
Day/ Night Mode
Route table number Default Related Program
1-8 0-25 ( 0 : No setting) 1
14-06
14-01-07
21-02-01 TEL200
Mode1=RouteTBL1
21-02-xx TELxxxx
xxxxx
COPY