NEC Xen Topaz - Page 169

Program 21 to 25
Xen Topaz Programming Manual 162
PROGRAM 21: OUTGOING CALL SETUP
21-07: T
OLL RESTRICTION OVERRIDE PASSWORD SETUP
Description
Use Program 21-07 - Toll Restriction Override Password Setup to assign Toll Restriction Override
codes to extension ports. Each code must be four digits long, using any combination of 0-9, # and *. Each
extension can have a separate code, or many extensions can share the same override code.
Input Data
Conditions
None
Feature Cross Reference
♦ Toll Restriction Override
Telephone Programming Instructions
To enter data for Program 21-07 (Toll Restriction Class):
1. Enter the programming mode.
2. Enter 21 07
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Number
Max. 4 digits
Password Default Related Program
4 digits fixed No setting
21-01-07
20-08-06
21-07-01 TEL200
Password
21-07-xx TELxxxx
xxxxx