NEC Xen Topaz - Page 187

Program 21 to 25
Xen Topaz Programming Manual 180
PROGRAM 22: INCOMING CALL SETUP
22-09: DID B
ASIC DATA SETUP
Telephone Programming Instructions
To enter data for Program 22-09 (DID Basic Data Setup):
1. Enter the programming mode.
2. Enter 22 09
3. Enter the number of the item you want to program.
4. Select the Trunk Group number to be programmed by pressing the FLASH or the VOLUME
▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
22-09-01TrkGrp1
D-In Recv digit4
22-09-xxTrkGrpxx
xxxxx