NEC Xen Topaz - Page 231

Program 26 to 35
Xen Topaz Programming Manual 224
PROGRAM 26: ARS SERVICE & LEAST COST ROUTING
26-02: D
IAL ANALYSIS TABLE FOR ARS
Telephone Programming Instructions
To enter data for Program 26-02(Dial Analysis Table for ARS):
1. Enter the programming mode.
2. Enter 26 02
3. Enter the number of the item you want to program.
4. Select the Dial Analysis Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
26-02-01AnaTb1
Dial
26-02-xxAnaTbxxx
xxxxx