Program 26 to 35
Xen Topaz Programming Manual 255
PROGRAM 35: SMDR AND ACCOUNT CODE SETUP
35-01: SMDR O
PTIONS
Description
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording) options for the
SMDR port. Refer to the following chart for a description of each option, its range and default setting.
Input Data
Conditions
None
Feature Cross Reference
♦ Station Message Detail Recording (SMDR)
IN
SA
SB
SMDR Port Number
1,2
Prog. No. Item Input Data Default
Related
Program
35-01-01
Output Port Type
This option specifies the type of con-
nection used for SMDR. The baud
rate for the COM port should be set in
Program 10-21-02.
0 : No Setting
1 : COM Port
(EXIFU)
3 : LAN port
(EXIFU)
0
35-01-02
-Not Used-
- -
35-01-03
Header Language
Specify the language in which the
SMDR header should be printed.
0 : English
4 : Spanish
0
35-01-04
Omit Digits
The number of digits entered in this
option do not print on the SMDR re-
port. For example, if the entry is 10,
the first 10 digits a user dials do not
appear on the SMDR report.
0-36 (0 : Not applied)
1
35-01-05
Min. Digits
Outgoing calls must be at least this
number of digits for inclusion in the
SMDR report.
0-36 (0 : Not applied)
0
35-01-06
Min. Call Duration
The duration of a call must be at least
this
interval to be included on the SMDR
report.
0-65535 (0 : All)
0
35-01-07
Min. Ring Time
A call must ring for at least this inter-
val to be included on the SMDR
report.
0-65535 (0 : All)
0
To Next Page
Loading...
