NEC Xen Topaz - Page 294

Program 40 to 92
Xen Topaz Programming Manual 287
PROGRAM 45: VOICE MAIL INTEGRATION
45-01: V
OICE MAIL INTEGRATION OPTIONS
Description
Use Program 45-01 :Voice Mail Integration Options to customize certain voice mail integration options.
Input Data
Conditions
None
Feature Cross Reference
♦ Voice Mail (In-skin)
IN
SA
SB
Prog. No. Item Input Data Default
Related
Program
45-01-01
Voice Mail Department Group Number
Assign which Extension (Department)
Group number is to be assigned as the
voice mail group.
0-32
(0 : No Voice Mail)
0
45-01-02
Voice Mail Master Name
Enter the Voice Mail master name.
Up to 8 characters
“V.M.”
45-01-03
Voice Mail Screening
Enable/disable the system’s ability to proc-
ess the Call Screening commands (1 +
extension number) sent from the Voice
Mail. You should normally enable this
option to allow for Voice Mail Call
Screening. Disable this option if your sys-
tem has been modified so that extensions
begin with the digit 1 (e.g., 101, 102, etc.).
Also see the Flexible System Numbering
feature.
0 : Off
1 : On
1
45-01-04
Park and Page
Enable/disable the system’s ability to proc-
ess the Voice Mail’s Park and Page (*)
commands. You should normally enable
this option.
0 : Off
1 : On
1
45-01-05
Message Wait
Enable/disable the system’s ability to proc-
ess the Voice Mail’s Message Wait (#)
commands. You should normally enable
this option. If enabled, be sure that the
programmed Message Notification strings
don’t contain the code #9 for trunk access.
0 : Off
1 : On
1
45-01-06
Record Alert Tone Interval Time
This timer sets the interval between voice
Mail Conversation Record alerts
0-64800 (sec.)
30
45-01-07
-Not Used- -
-
45-01-08
-Not Used- -
-
45-01-09
-Not Used- -
-