NEC Xen Topaz - Page 303

Program 40 to 92
Xen Topaz Programming Manual 296
PROGRAM 80: BASIC HARDWARE SETUP FOR SYSTEM
80-01: S
ERVICE TONE SETUP
Telephone Programming Instructions
To enter data for Program 80-01(Service Tone Setup):
1. Enter the programming mode.
2. Enter 80 01
3. Enter the number of the item you want to program.
4. Select the Service Tone number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
80-01-01 Tone1
Repeat Count 0
80-01-xx Tonexx
xxxxx