NEC Xen Topaz - Page 63

Program 12 to 15
Xen Topaz Programming Manual 56
PROGRAM 12: NIGHT MODE SETUP
12-02: A
UTOMATIC NIGHT SERVICE PATTERNS
Telephone Programming Instructions
To enter data for Program 12-02 (Automatic Night Service Patterns):
1. Enter the programming mode.
2. Enter 12 02
3. Enter the number of the item you want to program.
4. Select the Night Mode Service Group number to be programmed by pressing the FLASH or the
VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
12-02-01ModeGrp1
01-01Start=00:00
12-02-xxModeGrpx
xxxxx