Program 12 to 15
Xen Topaz Programming Manual 82
PROGRAM 14: TRUNK BASIC SETUP
14-07: T
RUNK ACCESS MAP SETUP
Feature Cross Reference
♦ Central Office Calls, Answering
♦ Central Office Call, Placing
Telephone Programming Instructions
To enter data for Program 14-07(Trunk Access Map Setup):
1. Enter the programming mode.
2. Enter 14 07
3. Enter the number of the item you want to program.
4. Select the Access Map number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
14-07-01Acs.Map1
TRK01 = 7
14-07-xxAcs.Mapx
xxxxx
IN
SA
SB
To Next Page
Loading...
