Olympus EPOCH 1000 Series - Peak Memory; Figure 5-1 Horizontal Line Indicating the Reject Level

910-269-EN, Rev. B, June 2011
102 Chapter 5
Figure 5-1 Horizontal line indicating the reject level
5.2 Peak Memory
The peak memory function enables the display to capture and store on the screen the
amplitude of each A-scan acquisition. The display updates each pixel if a signal of
greater amplitude is acquired. When you scan the transducer over a reflector, the
signal envelope (echo dynamic as a function of transducer position) is held on the
screen as a green line (see
Figure 5-2 on page 103). In addition, the current, live
waveform is displayed at the appropriate place within the signal envelope.
Reject level line
Downloaded from ManualsNet.com search engine