910-269-EN, Rev. B, June 2011
36 Chapter 1
Figure 1-13 Tilting angles using the bottom and rear stands
1.5.3 O-Ring Gasket and Membrane Seals
The EPOCH 1000 Series contains seals that are used to protect the instrument’s
internal hardware from the environment. These include:
• Battery compartment cover seal
• Computer connection compartment door seal
• Membrane vent
• Phased array connection cover seal
These seals must be properly maintained to assure environmental durability.
Instrument seals are evaluated and replaced as needed during the instrument’s
annual calibration. This should be performed at an authorized Olympus service
center.
1.5.4 Display Protection
EPOCH 1000 Series instruments include a clear-plastic sheet protecting the
instrument’s display window. You are advised to leave this sheet in place.
Replacements are available from Olympus in packages of 10 (PN: EP1000-DP).
Tilted on the bottom stand Tilted on the rear stand
16°
47°
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
