Olympus EPOCH 1000 Series - Gate Alarms; Figure 11-28 Indication Using -14 Db Floating Gate

910-269-EN, Rev. B, June 2011
238 Chapter 11
Figure 11-28 Indication using –14 dB floating gate
The floating gate option is not valid in RF mode. Also, the floating gate cannot be
turned on or off while the screen is frozen.
11.6.4 Gate Alarms
Individual gate alarms can be set while floating gate is active. The minimum depth
alarm is most commonly used to monitor thinning areas in the material when floating
gate is active and the gates are in edge-detection mode.
Downloaded from ManualsNet.com search engine