Olympus EPOCH 1000 Series - Figure 3-23 the Owner Info Setup Page with Its Virtual Keyboard

910-269-EN, Rev. B, June 2011
EPOCH 1000 Series Software Features 85
Figure 3-23 The Owner Info setup page with its virtual keyboard
2. Select the parameter that you want to edit using the [UP] or the [DOWN] arrow
key.
3. To enter a character from the virtual keyboard use one of the following methods:
a) Turn the adjustment knob until the desired character is selected, and then
press [CHECK] to add the character to the parameter.
OR
b) With a USB mouse connected to the EPOCH 1000 Series, click the desired
character. Press and hold [2
nd
F] while clicking a character to enter an
uppercase letter.
4. Repeat step 3 to enter other characters.
5. To delete an already entered character:
a) Move the cursor to the right of the character to delete by pressing the [LEFT]
or the [RIGHT] arrow key.
b) Turn the adjustment knob to select BS on the virtual keyboard, and then press
[CHECK].
6. To insert a character:
a) Move the cursor to the insert point by pressing the [LEFT] or the [RIGHT]
arrow key.
b) Repeat step 3 to insert a character.
Currently selected parameter
Virtual keyboard
Parameter being edited
Downloaded from ManualsNet.com search engine