Olympus EPOCH 1000 Series - Table 33 Pinout of the ANALOG out Connector

910-269-EN, Rev. B, June 2011
Specifications 317
13 GND Ground
14 GND Ground
15 ENCD INT X X-axis encoder increment
16 ENCD DIR X X-axis encoder direction
17 ENCD DIR Y Y-axis encoder direction
18 ENCD INT Y Y-axis encoder increment
19 SPARE IN 0 Spare input 0
20 EXT TRIG IN External trigger input
21 SPARE IN 1 Spare input 1
22 SPARE IN 2 Spare input 2
23 NO CONNECT No connection
24 NO CONNECT No connection
25 GND Ground
26 GND Ground
Table 33 Pinout of the ANALOG OUT connector
Pin Signal Description
1 ANALOG OUT 1 Analog output 1
2 ANALOG OUT 2 Analog output 2
3GNDGround
4 GND Ground
5 ANALOG OUT 3 Analog output 3
6 ANALOG OUT 4 Analog output 4
7GNDGround
8 GND Ground
9 NO CONNECT No connection
Table 32 Pinout of the ALARMS connector (continued)
Pin Signal Description
Downloaded from ManualsNet.com search engine