910-269-EN, Rev. B, June 2011
24 Chapter 1
The [CHECK] key sets the coarse/fine mode and the [ESCAPE] key returns the
focus one level up in the menu hierarchy.
1.2.4 About the Direct-Access Keypad
Important, commonly used parameters can be accessed via keys on the instrument
direct-access keypad.
Figure 1-5 on page 25 shows the keypad in its EPOCH 1000iR
and EPOCH 1000i configurations and provides indication of the differences for the
EPOCH
1000 configuration. There are two differences between the direct-access
keypad of conventional only versus conventional and phased array flaw detector
models:
1. The [ANGLE] key label is replaced by illustrating a focal law angle
selection.
2. The (UT-PA) secondary function is added to allow easy switching between
conventional and phased array operation modes.
The direct-access keypad is available in English, Japanese, Chinese, and international
versions.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
