910-269-EN, Rev. B, June 2011
176 Chapter 10
• File summary screen for measurement review without images and setup
• Ability to transfer data between the EPOCH 1000 Series and a computer or
printer.
• Ability to store files, images, and exported data on removable memory.
10.2 Data Logger Storage Capacity
The EPOCH 1000 Series stores the following information every time you press
[SAVE]:
•File name
• Identifier (ID) code
• Alarm conditions
• Gate measurement modes
• Sound path leg for each gate
• Up to six measurement reading box values (all active user-selected measurements
on the instrument screen).
• A-scan waveform
• S-scan image (phased array mode only)
• Peak memory envelope or peak hold waveform, if active
• Complete setup parameters
•Flag status ([FREEZE], zoom, [PEAK MEM], etc.)
• Active software feature(s) (DAC/TVG, DGS/AVG, AWS D1.1/D1.5)
The EPOCH 1000 Series data logger can store over 300,000 IDs with the information
listed above. All data is stored for every ID that you choose to save on the 2
GB
CompactFlash card provided with each instrument.
10.3 Files Submenu
The EPOCH 1000 Series data logger parameters are accessible by choosing the 5/5 >
Files submenu. The available parameters are:
Open
Used to select a file as the active storage location.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
