910-269-EN, Rev. B, June 2011
Reference Cursors 123
7. Reference Cursors
This chapter describes how to use the A-scan reference cursors on the EPOCH 1000
Series. The topics covered are as follows:
• Cursors A and B
• Activating and Positioning Cursors
• Cursor Measurements
7.1 Cursors A and B
The EPOCH 1000 Series provides two visual and measurement reference cursors that
can be displayed on the instrument’s A-scan view. These cursors are controlled with
parameters from the 2/5
> Ref Cursor submenu.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
