Olympus EPOCH 1000 Series - Setting up and Printing Reports; Figure 10-7 the Reportsetup Setup Page

910-269-EN, Rev. B, June 2011
188 Chapter 10
10.4 Setting Up and Printing Reports
The EPOCH 1000 Series allows you to create basic reports on the instrument from
stored or live data and print them out in the field using the USB host port of the
instrument. To print an onboard report, you must be able to set up a Report Header,
set up the printer output, and have access to a PCL5 compatible printer.
To set up and print a report
1. Choose 5/5 > Files > Page Setup to open the ReportSetup setup page.
Figure 10-7 The ReportSetup setup page
2. Using the virtual keyboard or a USB keyboard:
a) Enter up to eight lines of text for the Report Label.
These lines appear at the top of the report that is printed from the instrument.
b) Enter up to eight lines of text for the Report Header.
These lines also appear at the top of the report that is printed from the
instrument.
Downloaded from ManualsNet.com search engine