910-269-EN, Rev. B, June 2011
40 Chapter 2
2.1 Starting the EPOCH 1000 Series
Figure 2-1 on page 40 shows the location of the power key and of the power indicator.
Figure 2-1 Location of the EPOCH 1000 power key and indicator
Pressing the [ON/OFF] power key causes an initial beep. The instrument’s startup
screen appears. The instrument then goes through a series of self-tests for 45 to 60
seconds and then starts up. The power indicator and the battery indicator provide
basic feedback regarding the operating/charging status of the instrument (see
Table 6
on page 40).
Table 6 Power indicator status
Indicator state AC line power Indicator meaning
Battery
indicator
Green Yes Internal battery fully charged
Red Yes Internal battery is charging
Off No AC line power not connected
[ON/OFF]
power key
Power indicator
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
