910-269-EN, Rev. B, June 2011
254 Chapter 14
A/S Horz
Selected A-scan and S-scan are both viewable. The A-scan is oriented horizontally
and located above the S-scan on the display.
Figure 14-1 The four display view modes
The EPOCH 1000 Series displays all A-scans in sound path mode only. The S-scan
view is displayed in true-depth mode. This means that in A/S Vert mode,
indications viewed in the selected A-scan do not line up horizontally with their
corresponding point in the S-scan. For further information, see section 14.8 on
page 263.
Downloaded from ManualsNet.com search engine