Olympus EPOCH 1000 Series - About Setup; Table 20 Content of the 4;5 Standard Menu in PA Mode; Table 21 Content of the 5;5 Standard Menu in PA Mode

910-269-EN, Rev. B, June 2011
66 Chapter 3
3.3 About Setup Pages
The EPOCH 1000 Series software features a number of setup pages allowing you to
adjust instrument features and functions to your preferences. The setup pages are
accessible by selecting the corresponding parameter. For example, in PA operation
mode, choose 1/5
> PA Probe > Beam to access the Beam setup page shown in
Figure 3-14 on page 67.
Table 20 Content of the 4/5 standard menu in PA mode
Submenu Parameters
Sizing
Option
AWS D1.1
Table 21 Content of the 5/5 standard menu in PA mode
Submenu Parameters
Files
Open Create Reset
Page
Setup
First ID Last ID Id:
Downloaded from ManualsNet.com search engine