910-269-EN, Rev. B, June 2011
14 Preface
• Color liquid crystal display (LCD) with full VGA resolution and transflective
technology
• Compliance with EN12668-1
• A 100 % digital high dynamic range receiver design
• Over 30 digital receiver filters
• Maximum 6000 Hz pulse repetition frequency (PRF) for high- speed scanning
• Phased array imaging capabilities
• Dynamic DAC/TVG sizing software
• Onboard DGS/AVG sizing software
• Image and A-scan reference and measurement cursors
• Four programmable analog outputs
• Six programmable alarm outputs
• USB and RS-232 connectivity
• Adjustment knob and navigational arrow keys
• Standard 2 GB CompactFlash card
• VGA Output Capability
Read through this information completely at least once with your
EPOCH
1000/1000iR/1000i in hand so that you can combine reading the descriptions
and examples with the actual use of the instrument.
EPOCH 1000 Series Models
The EPOCH 1000 Series offers three instrument configuration levels to suit many
inspection needs:
EPOCH 1000 Advanced UT
An advanced conventional ultrasonic flaw detector that can be upgraded with
phased array imaging at an authorized Olympus service center.
EPOCH 1000iR Advanced UT + Phased Array Ready
Provides the same ultrasonic flaw detection capabilities as the EPOCH 1000 with
the benefit of upgrading to phased array with simple field-remote activation.
EPOCH 1000i Advanced UT + Phased Array Built-in
Comes standard with the same advanced ultrasonic flaw detection capabilities as
the EPOCH 1000 as well as with the benefits of a built-in phased array imaging
package.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
