910-269-EN, Rev. B, June 2011
Software Features and Options (Conventional UT Mode) 221
Figure 11-19 DGS/AVG setup page
This screen allows you to define the exact probe being used for the inspection, and to
set up the DGS/AVG curve to be drawn. There are several adjustments that can be
made from this setup page:
DGS/AVG
Activate/Deactivate the DGS/AVG function
Probe Type
Selects the type of probe to be used (Straight Beam, Angle Beam, Dual, or
Custom).
Probe Name
Selects the actual probe to be used.
Reflector Type
Defines the type of reflector to be used to acquire a reference indication to build
the DGS/AVG curve.
• For straight beam and dual probes, the available reflectors are:
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
