910-269-EN, Rev. B, June 2011
266 Chapter 14
Figure 14-9 S-scan with the leg indicators active
14.8.3 Grid Modes
The Display setup page allows you to turn grid views of the A-scan and S-scan on or
off independently.
To turn a grid mode on or off
1. To open the Display setup page, choose 3/5 > Display Setup > Image Overlay.
2. Select Sector Grid = On or Ascan Grid = On.
These grid modes correspond to the x-axis grid modes described in chapter 5 on
page 101. Available grid modes include: Off, Standard, Sound Path, Leg, 100%, and
110%. These modes can be activated or deactivated from the A-scan Setup setup page
accessible by choosing 3/5
> Display Setup > A-Scan Setup.
Leg indicators
(horizontal white lines)
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
