910-269-EN, Rev. B, June 2011
Software Features and Options (Conventional UT Mode) 195
11. Software Features and Options (Conventional UT
Mode)
This chapter discusses the activation and operation of software features and options
for the EPOCH
1000 Series conventional UT mode. The topics are as follows:
• Defining Licensed and Unlicensed Software Features
• Dynamic DAC/TVG
• DGS/AVG
• AWS D1.1/D1.5 Weld Rating Software
• Interface Gate
• Floating Gate
11.1 Defining Licensed and Unlicensed Software Features
The EPOCH 1000 Series comes standard with many software features that expand the
instruments’ capabilities beyond standard flaw detection.
The following software features are standard components of the EPOCH 1000 Series
conventional flaw detector:
• Dynamic DAC/TVG
•DGS/AVG
• AWS D1.1/D1.5 Weld Rating Software
The EPOCH 1000 Series also has two software options available. These options are not
standard inclusions of the base instrument, and must be purchased and added to the
unit. These two options, interface gate and floating gate, can be activated at the time
of purchase of the instrument, or can be activated remotely after purchase of the
instrument.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
