910-269-EN, Rev. B, June 2011
180 Chapter 10
Figure 10-2 The Open setup page
The list of available files appears at the top-left of the setup page. Use the [UP] and
[DOWN] arrow keys to scroll through each file. The IDs stored in each file are listed
on the right of the screen when the file is highlighted.
To review a list of saved measurement readings within a particular file, highlight the
file and press [CHECK]. A list of all IDs with measurement readings appears in the
lower-half of the display.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
