910-269-EN, Rev. B, June 2011
Important Information — Please Read Before Use 7
High voltage warning symbol:
This symbol is used to alert you to potential electric shock hazards higher than
1,000 volts. All safety messages that follow this symbol shall be obeyed to avoid
possible harm.
Safety Signal Words
The following safety symbols may appear in the documentation of the instrument:
The DANGER signal word indicates an imminently hazardous situation. It calls
attention to a procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in death or serious personal injury. Do not proceed beyond a
DANGER signal word until the indicated conditions are fully understood and met.
The WARNING signal word indicates a potentially hazardous situation. It calls
attention to a procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in death or serious personal injury. Do not proceed beyond a
WARNING signal word until the indicated conditions are fully understood and met.
The CAUTION signal word indicates a potentially hazardous situation. It calls
attention to an operating procedure, practice, or the like, which, if not correctly
performed or adhered to, could result in minor or moderate personal injury, material
damage, particularly to the product, destruction of part or all of the product, or loss of
data. Do not proceed beyond a
CAUTION signal word until the indicated conditions are
fully understood and met.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
