910-269-EN, Rev. B, June 2011
16 Preface
Typographical Conventions
Table 2 on page 16 presents the typographical conventions employed in this document.
If You Have Documentation Comments
Olympus is always interested in improving its documentation. We value your
comments about the manual and other Olympus documentation.
Complete the survey in section “Documentation Comments” on page 353 of this
document.
Table 2 Typographic conventions
Convention Description
Bold Used when referring to the label of a user interface
element, including menu items, buttons, toolbar names,
options, and tabs.
[BOLD] Used when referring to an instrument front panel key.
[2
ND
F],
[BOLD](BOLD)
Used when referring to the secondary function of an
instrument front panel key.
[BOLD] is the primary function of the key.
(BOLD) is the secondary function of the key, appearing
above the direct-access keypad key.
The comma means to sequentially press and release the
two keys.
ALL UPPERCASE Used to refer to computer keyboard keys
S
MALL CAPS Used to refer to marking on the instrument for connector
names for example.
Italics Used to refer to document titles.
<n> Used to represent a variable.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
