Olympus EPOCH 1000 Series - Figure 10-8 Report Example

910-269-EN, Rev. B, June 2011
Managing the Data Logger 189
3. Choose Printer, and then select between PCL Inkjet or PCL Laser, corresponding
to the type of printer that you connect to the instrument.
4. Optionally, choose Draft Mode = On to print a low-resolution draft of the report.
5. Optionally, choose Color = On to print the report in color (Off for black and
white).
6. Select Print Function = Report.
7. Press [ESCAPE] to save the report configuration and exit the setup page.
8. Press the [2
nd
F], [RECALL SETUP] (PRINT) keys to print the report to the
destination specified in step
6 (see the report example shown in Figure 10-8 on
page 189).
Figure 10-8 Report example
Downloaded from ManualsNet.com search engine