910-269-EN, Rev. B, June 2011
Managing the Data Logger 177
Create
Used to create a new file.
Reset
Used to access the instrument and database reset functions.
Page Setup
Used to access printing functions and removable storage setup items.
First ID
Used to jump the current file to the first identifier (ID) in the file.
Last ID
Used to jump the current file to the last identifier (ID) in the file.
Id:
Indicates which identifier (ID) is currently active for storage
These parameters are covered in detail in the following sections.
10.3.1 Creating Data Files
You must create a data file before any information can be stored to the EPOCH 1000
Series. This file creation can be performed onboard the instrument, or can be created
in the GageView
Pro computer interface program and uploaded to the instrument.
To create files onboard the instrument
1. Choose 5/5 > Files > Create to open the Create setup page shown in Figure 10-1
on page 178.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
