Olympus EPOCH 1000 Series - Figure 10-4 the Quick Recall Dialog Box

910-269-EN, Rev. B, June 2011
184 Chapter 10
Figure 10-4 The Quick Recall dialog box
Only files created using the CAL file type are displayed in the quick recall setup
window.
To quickly recall a file using the recall setup
1. Press [RECALL SETUP].
The Quick Recall dialog box appears.
2. Use the [UP] and [DOWN] arrow or the adjustment knob to select the desired
calibration file.
3. Press [CHECK] to select the desired file and recall its settings as the live
instrument parameters.
4. Press [ESCAPE] to cancel the operation and return to the live screen.
Downloaded from ManualsNet.com search engine