Olympus EPOCH 1000 Series - Function and Parameter Keys; Parameter Adjustment; Figure 1-4 [F<N>] and [P<N>] Keys Pointing to Software Buttons

910-269-EN, Rev. B, June 2011
EPOCH 1000 Series Hardware Features 23
1.2.2 Function and Parameter Keys
The EPOCH 1000 Series handles adjustments and/or the activation of most software
functions via an intuitive menu system. Menu system software buttons appear at all
times, vertically on the right side and horizontally at the bottom of the display. Five
function keys ([F1] through [F5]) and seven parameter keys ([P1] through [P7]) are
located around the display, allowing you to individually activate a software button. In
the example of
Figure 1-4 on page 23, pressing [F2] chooses the PA Display software
button and activates the corresponding function.
Figure 1-4 [F<n>] and [P<n>] keys pointing to software buttons
1.2.3 Parameter Adjustment
Software parameter value adjustments, such as Gain or Range, can be accomplished
via two primary methods:
•Use the [UP] and [DOWN] arrow keys respectively to increase and decrease a
parameter value in either coarse or fine steps.
• Turn the adjustment knob clockwise to increase parameter values, and
counterclockwise to decrease a parameter value in either coarse or fine steps.
Software buttons
Parameter keys
Function
keys
Software buttons
Downloaded from ManualsNet.com search engine